Desktop Access Filter: Choose Who Can Connect to Your Cloud Desktop
The Desktop Access Filter is the app on your Infosaic cloud desktop that decides who can connect with the Remote Desktop app. Pick a protection mode, list the addresses you connect from, block the ones you never want to see and close the ports you do not use. Browser access through the Infosaic web interface always works.
How-to guide / 6 min read

The Desktop Access Filter as it opens: where things stand at the top, the protection modes under it.
At a glance
- Applies to
- Infosaic Windows cloud desktops · the Remote Desktop app · Windows Defender Firewall
- Where
- Infosaic Access Filter, on your cloud desktop and in the Start menu
- Modes
- Filter on, Browser only, Off, Off for a while
- Your list
- Your provider, single addresses and ranges
- Blocked
- Kept out on every port, in every mode
- Other ports
- Open, Your list or Closed, port by port
- Always works
- Browser access through the Infosaic web interface
- Saving
- Nothing to save: every change applies at once
The Remote Desktop port of a Windows machine can be reached from anywhere on the internet unless something says otherwise. The Desktop Access Filter is that something. It is installed on your Infosaic cloud desktop, it works through Windows Defender Firewall, and a connection you have not allowed is turned away before it reaches the sign-in screen.
You choose who can connect with the Remote Desktop app, you keep the addresses you block out of the desktop altogether, and you close the other ports you do not use. Browser access through the Infosaic web interface is never affected, so you can always sign in from a browser, which is also the way to put things right if a setting ever keeps you out.
Open the Access Filter
- Start the appOpen Infosaic Access Filter from the desktop or the Start menu.
- Say yes to WindowsWindows asks for administrator rights, because the app works with the Windows Firewall. Click Yes.
- Read the banner at the topIt says where things stand, for example Protected or Open to everyone, with a line on what that means right now.
The window reads from top to bottom: Protection, then Allowed to connect, then Blocked, then Other ports. The Help button at the top right opens the help installed with the app, and the link at the bottom of the window, Help and support on infosaic.com, leads here.
Choose a protection mode
Four cards under Protection decide how the Remote Desktop app is treated. Click one to switch.
| Mode | Who can connect with the Remote Desktop app | Good for |
|---|---|---|
| Filter on | Only the addresses in your list | Everyday use |
| Browser only | Nobody. You sign in through the Infosaic web interface in your browser | Working only from a browser |
| Off | Anyone can try to connect, as before. Your list is kept for later | A quick test, or connecting from somewhere new |
| Off for a while | Anyone, for 1, 4 or 24 hours. Then the filter turns itself back on | Travel, or a one-time connection |
Off for a while keeps counting through a restart, so the filter comes back on when the time is up even if the desktop restarted in between.
Build your list of allowed addresses
Allowed to connect is the list Filter on works from. It can hold any mix of entries, and the number next to the title shows how many there are. The two buttons at the top right of the card add to it.

Two providers, an office and one address. Addresses, providers and programs in the screenshots are examples.
My provider
Allows your internet provider's network, so you can still connect when your own address changes. You can add more than one provider, for example home and mobile, and the address you are connected from is filled in when the app can read it.
- Your area allows the part of the provider's network your address belongs to.
- Whole network allows every address your provider uses. It suits mobile connections, whose address changes often. The Whole network switch on each provider widens or narrows it later.
Address or range
For an office with a fixed address, or one particular computer. Type it in any of these forms and give it a name such as Office:
- a single address: 203.0.113.25
- a block: 203.0.113.0/24, or written with a star: 203.0.113.*
- a from-to range: 203.0.113.10-203.0.113.40
The bin icon on an entry removes it. Because removing an entry could cut off the connection you are using, the app asks you to confirm afterwards that you can still see the window.
Block addresses you never want to see

One entry can hold several addresses and ranges under one name.
Blocked is the card under your list. Addresses in it cannot reach the desktop at all: not with the Remote Desktop app, not on any other port, whatever the protection mode. A block also wins over your allowed list, so an address that is in both stays out.
Click Address or range on the Blocked card, type one or several addresses separated by commas or spaces, add a name such as Login attempts if you like, and click Block. Unblock on the entry lets them in again. The full walk-through, with the messages you may see, is in Block an address or range.
Close the ports you do not use

Every port a program on the desktop opens to the internet, with three choices beside it.
Remote Desktop is not the only way into a Windows machine. A web server, a database, SSH or a remote-control tool such as VNC each listen on a port of their own, and if a firewall rule lets the internet in, anyone can reach them. Other ports lists every one of them, apart from Remote Desktop itself, which the protection modes look after. For each port you choose:
- Open: as Windows has it now.
- Your list: only the addresses in your allowed list can reach the port. When you add or remove addresses in the list, the port follows.
- Closed: nobody from outside can reach the port. Programs on the desktop itself keep working.
A port that is not listed, for example one a program will use later, can be closed ahead of time with the Port button. Details in Close or limit other ports.
Protection against locking yourself out
Keep the change, or it is undone by itself

Blocking the address you are connected from brings up this warning first.
After any change that could cut off your Remote Desktop connection, the app asks Can you still see this window? Click Keep the change. If the change did cut you off, nobody can click, and after 30 seconds the app undoes the change by itself, so the Remote Desktop app can connect again.
The check appears when you turn the filter on, switch to Browser only, remove an entry, switch a provider from its whole network back to your area, turn off another firewall rule, or block a range that includes the address you are connected from.
A red warning first
Switching to Browser only shows a red warning before anything changes, because nobody can connect with the Remote Desktop app in that mode. Blocking the address you are connected from gets one too.
The way back in
Browser access through the Infosaic web interface always works and cannot be blocked. If a setting ever keeps you out, sign in from a browser, open the Access Filter and change it back.
When another firewall rule lets everyone in
If another rule in Windows Defender Firewall lets anyone reach the Remote Desktop port, the filter cannot block anyone while that rule is on. The app shows such a rule in a red bar with a Turn this rule off button. The rule is turned off, not deleted, so it can be turned back on in Windows Defender Firewall.
If Remote Desktop uses another port
The filter works with whatever port Remote Desktop listens on, shown at the bottom left of the window, for example Remote Desktop port 3389. If you move Remote Desktop to another port, the filter follows it, and the app moves Windows' own Remote Desktop rules to the new port the next time it opens. A port change in Windows takes effect after a restart; until then the app shows both ports.
There is nothing to save
Every change goes into Windows Firewall the moment you make it. The bar at the bottom of the window says so: "All changes are saved." Close the app whenever you like and the protection stays exactly as you set it.
For your IT person: where the settings live
Everything is stored in Windows Defender Firewall, in the rule group Infosaic Access Filter. Nothing is kept anywhere else.
- Blocked entries are inbound block rules named Infosaic Access Filter - Blocked: followed by the entry's name.
- Closed or limited ports are inbound block rules named, for example, Infosaic Access Filter - Port 8080 TCP closed, or ending in your list only.
- Block rules win over allow rules in Windows Firewall, which is why a blocked address stays out even when another rule would let it in.
Related guides
- News: the Access Filter comes to every Infosaic cloud desktopGuide
- Two-Factor Sign-in: a code from your phone after the passwordGuide
- Block an address or range with the Desktop Access FilterGuide
- Close or limit other ports with the Desktop Access FilterGuide
- How to open your cloud desktop in a web browserGuide
- RDP will not connect: how to fix itGuide
Common questions
Can the Access Filter lock me out of my desktop?
Not for long, and never completely. A change that could cut your connection is undone after 30 seconds unless you confirm it, and browser access through the Infosaic web interface always works, so you can sign in there and change the setting.
Does the filter affect browser access?
No. The Infosaic web interface always reaches your desktop and cannot be blocked, whatever you choose in the app.
My home address keeps changing. What should I add?
Add your internet provider with My provider instead of a single address. Your area covers the part of the network your address belongs to; Whole network suits mobile connections whose address changes often.
Do I need to save my changes?
No. Every change goes into Windows Firewall the moment you make it, and stays there when you close the app.
What happens when Off for a while runs out?
The filter turns itself back on after 1, 4 or 24 hours, whichever you chose, even if the desktop restarted in between.
Is a blocked address still blocked when the filter is off?
Yes. Blocks hold in every protection mode, including Off and Off for a while, and they win over your allowed list.
Why does the app ask for administrator rights?
It works with the Windows Firewall, and Windows only lets an administrator change firewall rules.
Will closing a port stop a program on my desktop?
No. Programs on the desktop itself keep working. Only connections from outside are stopped.
Still stuck?
Open a support request from your control panel - that is the fastest route, because it reaches the team who can already see your account and your desktop. You can also email [email protected].
